Triple point Totally Explained

Everything about Triple Point totally explained

In physics and chemistry, the triple point of a substance is the temperature and pressure at which three phases (for example, gas, liquid, and solid) of that substance coexist in thermodynamic equilibrium. For example, the triple point temperature of mercury is at −38.8344 °C, at a pressure of 0.2 mPa. In addition to the triple point between solid, liquid, and gas, there can be triple points involving more than one solid phase, for substances with multiple polymorphs. Helium-4 is a special case that presents a triple point involving two different fluid phases (see lambda point). In general, for a system with p possible phases, there are

frac

triple points. The number given for the temperature of the triple point of water is an exact definition rather than a measured quantity. The triple points of several substances are used to define points in the ITS-90 international temperature scale, ranging from the triple point of hydrogen (13.8033 K) to the triple point of water (273.16 K).

Triple point of water

The single combination of pressure and temperature at which water, ice, and water vapour can coexist in a stable equilibrium occurs at exactly 273.16 K (0.01 °C) and a partial vapour pressure of 611.73 pascals (ca. 6.1173 millibars, 0.0060373057 atm). At that point, it's possible to change all of the substance to ice, water, or vapor by making arbitrarily small changes in pressure and temperature. Note that even if the total pressure of a system is well above 611.73 pascals (for example a system having a normal atmospheric pressure), if the partial pressure of the water vapour is 611.73 pascals then the system can still be brought to the triple point of water. Strictly speaking, the surfaces separating the different phases should also be perfectly flat, to avoid the effects of surface tensions.
   Water has an unusual and complex phase diagram, although this doesn't affect general comments about the triple point. At high temperatures, increasing pressure results first in liquid and then solid water. (Above around 10⁹ Pa a crystalline form of ice forms that's denser than liquid water.) At lower temperatures under compression, the liquid state ceases to appear, and water passes directly from gas to solid.
   At constant pressures above the triple point, heating ice causes it to pass from solid to liquid to gas, or steam, also known as water vapor. At pressures below the triple point, such as those that occur in outer space, where the pressure is near zero, liquid water can't exist. In a process known as sublimation, ice skips the liquid stage and becomes steam when heated.
   The triple point pressure of water was used during the Mariner 9 mission to Mars as a reference point to define "sea level". More recent missions use laser altimetry and gravity measurements instead of pressure to define elevation on Mars.

Triple point cells

Triple point cells are useful in the calibration of thermometers. For exacting work, triple point cells are typically filled with a highly pure chemical substance such as hydrogen, argon, mercury, or water (depending on the desired temperature). The purity of these substances can be such that only one part in a million is a contaminant; what is called “six-nines" because it's 99.9999 % pure. When it's a water-based cell, a special isotopic composition called VSMOW is used because it's very pure and produces temperatures that are more comparable from lab to lab. Triple point cells are so effective at achieving highly precise, reproducible temperatures, an international calibration standard for thermometers called ITS–90 relies upon triple point cells of hydrogen, neon, oxygen, argon, mercury, and water for delineating six of its defined temperature points.

Table of triple points

This table lists the triple points of common substances, based on data from the U.S. National Bureau of Standards (now NIST).

Substance	T (K)	P (kPa)
Acetylene	192.4	120
Ammonia	195.40	6.076
Argon	83.81	68.9
Graphite	3900	10100
Carbon dioxide	216.55	517
Carbon monoxide	68.10	15.37
Deuterium	18.63	17.1
Ethane	89.89	8 × 10⁻⁴
Ethylene	104.0	0.12
Helium-4 (lambda point)	2.19	5.1
Hydrogen	13.84	7.04
Hydrogen chloride	158.96	13.9
Mercury	234.2	1.65 × 10⁻⁷
Methane	90.68	11.7
Neon	24.57	43.2
Nitric oxide	109.50	21.92
Nitrogen	63.18	12.6
Nitrous oxide	182.34	87.85
Oxygen	54.36	0.152
Palladium	1825	3.5 × 10⁻³
Platinum	2045	2.0 × 10⁻⁴
Sulfur dioxide	197.69	1.67
Titanium	1941	5.3 × 10⁻³
Uranium hexafluoride	337.17	151.7
Water	273.16	0.61
Xenon	161.3	81.5
Zinc	692.65	0.065

Further Information

Get more info on 'Triple Point'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://triple_point.totallyexplained.com">Triple point Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.